ProductsElectrochemical Measurement System HZ-7000
HZ-7000 is a compact and high performance potentiostat / galvanostat which is equipped with a LCD monitor and includes data memory function. HZ-7000 can perform electrochemical measurements of varieties.
Features
HZ-7000 is a compact and high performance potentiostat / galvanostat which is not only remote-controlled by PC via Ethernet but also capable of basic measurement in stand-alone mode.
HZ-7000 offers to various measurement techniques. So it can be used widely, from basic research to applied research.
- HAG1232m: remote-control only
- HAG1232mP: remote-control / stand-alone
- Basic measurement can be performed in stand-alone mode.
(OCP, LSV, CV, CA, CP, NPV, DPV, IR, SCV, OSWV, ZRA, CDC, etc.) - Saving the data and measurement condition to USB memory.
And loading the measurement condition from USB memory. - The potential of RE/CE and CE/WE is measured simultaneosly.
- Minimum current range: 30nA; capable of low current control and measurement
- Arbitrary waveform control up to 99steps.
- Function can be extended by adding option board. (bi-potentiostat, EIS, QCM, etc.)
- Booster option (30V, 3A or 12V, 30A)
Measurement Software
| Techniques | Remote | Stand-alone | Techniques | Remote | Stand-alone | Remarks |
|---|---|---|---|---|---|---|
| OCP(OCV) | ○ | ○ | LSSV | ○ | - | - |
| LSV | ○ | ○ | DPSV | ○ | - | - |
| CV | ○ | ○ | ZRA | ○ | ○ | - |
| CA | ○ | ○ | OSWV | ○ | ○ | - |
| CP | ○ | ○ | CDC | ○ | ○ | - |
| CC | ○ | ○ | PEIS | ○ | ○ | require FRA board |
| BE | ○ | ○ | GEIS | ○ | ○ | require FRA board |
| IR | ○ | ○ | Constant Voltage 8 steps | ○ | △ (4steps) | - |
| SCV | ○ | - | Constant Current 8 steps | ○ | △ (4steps) | - |
| REST | ○ | - | Potentio Arbitrary function | ○ | - | - |
| NPV | ○ | ○ | Galvano Arbitrary function | ○ | - | - |
| DPV | ○ | ○ |
Specifications
| Control output | |
| Maximum output voltage | ±12V |
|---|---|
| Maximum current | ±300mA |
| Potential control range | ±10V(±10V, -5V - +15V, 0V - +20V: with potential shift function) (*1) |
| Potential control resolution | 66µV(2Vrange) |
| Current control resolution | 0.004% of Full Scale Range |
| Potential control accuracy | ±0.05% of setting ±1mV |
| Current control accuracy | ±0.2% of Full Scale Range |
| Response speed | < 2µsec |
| Potential/Current measurement | |
| Potential ranges | 2V, 10V, AUTO (±10V, -5V-+15V, 0V-+20V: with potential shift function) (*1) |
| Potential measurement accuracy | ±0.05% of reading ±1 mV |
| Potential measurement resolution | 0.003% of Full Scale Range, Minimum 66µV(2Vrange) |
| Current ranges | 300mA - 30nA(8ranges), AUTO |
| Current measurement accuracy | ±0.2 % of Full Scale Range |
| Current measurement resolution | 0.004% of Full Scale Range, Minimum 1.1pA (30nA range) |
| Input impedance | > 1TΩ |
| Input bias current | < 10pA |
| Data sampling interval | 10µs - 1800s (There are some limitation depending on method) |
| General | |
| Dimentions | HAG1232mP : W260xH165xD342mm |
| HAG1232m : W260xH165xD335mm | |
| Weight | 6.0kg |
| Power requirements | AC100 - 240V, 70VA |
| PC | Windows 7,8,10 Professional |
- *1potential shift function is not available when HZAP3003 is connected.